base 2 galva®
Galvanized steel base for distributing loads over two foundation screws
Equipped with a central hole of Ø 17 mm, the BASE2 can support vertical loads equivalent to twice that of a foundation screw (A1-A7).
Fasteners can be easily drilled into the BASE in the space between the 2 foundation screws. You have a large degree of freedom in deciding where to position theme.
It is also recommended if it is not possible to keep a minimum distance of 50 cm between the foundation screws.
To be used with Fix 2D Base 2-3 (B22) or with Fix 3D Base2-3 (B8).
|Composition & treatment|
Hot-dip galvanized steel in accordance with standard ISO 1461
|Load bearing capacity|
Distribution of heavy loads over several foundation screws
Complementary & alternative products
connect container l®
Accessory used for fastening heavy structures to the Connect Container and Bases 2 and 3.
U-shaped connector for wooden cross-section of 140 mm. MULTI-PURPOSE. Optional reinforcement for Wood140 (C6).
Cast-iron connector for attaching a vertical tubular post with a max. diameter of 60.3 mm to a concrete slab or a standard foundation screw FS XXXX-F.
Standard foundation screw for compact, earthy soil. With an M16 thread in the centre of the head for attaching connectors.
Foundation screw, length 1,000 mm. With an M16 thread in the centre of the head for attaching connectors.
Foundation screw, length 1,250 mm. With an M16 thread in the centre of the head for attaching connectors.