Installing low-resistance wooden fence posts

If the lateral forces to which the enclosure or fence is subjected are low due to the type of enclosure or the environment, the solution should be inexpensive and easy to install.
Therefore, the preferred solution is one that is made up of one 100 cm or 125 cm screw per post, to which a connector adapted to the type of post in question is attached.

The Connect U70-U90-U120 and U 140 components cover a wide range of posts with a square cross-section. They allow for lateral adjustment and, combined with the Fix 3D connect U, they make it possible to adjust the vertical position of the enclosure.

Advantage 1: Quick and inexpensive system which leaves the ground intact.

Advantage 2: “Connect U70-90-120-140” connectors are very easy to mount and allow for adjustment in all directions.

1/6

Fastening to wooden section Weak lateral force

This solution is carried out in 4 steps:

1. Making holes in the ground

2. Installing foundation screws

3. Positioning of vertical adjustment system

4. Positioning of post & connector

Step 1: Making holes in the ground

It is essential to first make a hole in the ground as this ensures that the screw will penetrate well into the soil.
Lubrication helps to position the foundation screw.

Step 2: Installing foundation screws

Our portable electric machines, in combination with a laser transmitter and receiver, are used to install the screws in a level position and do not require any specific actions.

Step 3: Positioning of vertical adjustment system

First, put the “Fix3D connect U” in place and adjust its vertical position.
Then, put the “Connect U” in place, adjust the alignment and securely attach the whole thing

Step 4: Positioning of post & connector

Attach the “Connect U” removable plate to the post, then insert the whole thing into the “Connect U” and fasten the post with wood screws and/or bolt through everything.

Result

Repeat the steps for each post.